I am curious about these carbs as I bought one. Would like to hear from a fellow trials rider or someone thats got one.
Backyardy
OKO carbs
Moderator: Moderators
- Neo
- Expert participant
- Posts: 444
- Joined: Fri Dec 31, 2004 1:27 pm
- Bike: 06 Sherco 250
- Club: TCC
- Location: Central Coast, NSW
Re: OKO carbs
"Nothing more and nothing less than the vision of success"..... Ryan Leech
"TRIALS....It's not life or death....It's much more serious than that!!".....
"TRIALS....It's not life or death....It's much more serious than that!!".....
-
- A grade participant
- Posts: 123
- Joined: Sun Jul 12, 2009 1:55 pm
- Bike: Honda tlr 250
- Club: oakleigh
- Location: Nyora
Re: OKO carbs
What sort of bike do you have it on, I must say the quality is not the same as a Mikuni or Keihen!!!
- Neo
- Expert participant
- Posts: 444
- Joined: Fri Dec 31, 2004 1:27 pm
- Bike: 06 Sherco 250
- Club: TCC
- Location: Central Coast, NSW
Re: OKO carbs
2005 Shecro 250
Link above updated.
Best of balance.
Neo.
Link above updated.
Best of balance.
Neo.
"Nothing more and nothing less than the vision of success"..... Ryan Leech
"TRIALS....It's not life or death....It's much more serious than that!!".....
"TRIALS....It's not life or death....It's much more serious than that!!".....
- OKOAustralia
- C grade participant
- Posts: 24
- Joined: Tue Aug 19, 2008 7:13 am
- Bike: Any I can find
- Location: Brisbane Australia
- Neo
- Expert participant
- Posts: 444
- Joined: Fri Dec 31, 2004 1:27 pm
- Bike: 06 Sherco 250
- Club: TCC
- Location: Central Coast, NSW
Re: OKO carbs
In a way I'll agree with Eagle....The carb is not as well cast as the Keihin...The metal surface and edges are a little rougher and not as polished.
But I think the OKO is a real improvement on the Keihin in a number of areas. Particularly when it comes to air venting and fuel overflow. And it weighs less too. And to be honest, I don't give a stuff how rough the metal is.....so long as the performance is good.
Sorry but I must congratulate OKO for a bloody good copy
Best of balance.
Neo
But I think the OKO is a real improvement on the Keihin in a number of areas. Particularly when it comes to air venting and fuel overflow. And it weighs less too. And to be honest, I don't give a stuff how rough the metal is.....so long as the performance is good.
Sorry but I must congratulate OKO for a bloody good copy
Best of balance.
Neo
"Nothing more and nothing less than the vision of success"..... Ryan Leech
"TRIALS....It's not life or death....It's much more serious than that!!".....
"TRIALS....It's not life or death....It's much more serious than that!!".....
- OKOAustralia
- C grade participant
- Posts: 24
- Joined: Tue Aug 19, 2008 7:13 am
- Bike: Any I can find
- Location: Brisbane Australia
Re: OKO carbs
that's very interesting because we have found the opposite regarding the casting finish. Overall it is smoother finish than other brands but I take your point, there are one or two external areas that could be cleaned up better after the casting process.
By the way, we have new model roundslide OKOs available:
OKO 3000 - Now available in 28mm! Popular choice for classics and post classic trials bikes! Price to be confirmed..
OKO 3005 - Large bore roundslide - available in 32, 34, 36, 38 and 40mm! We have finally crumpled under the demand for a larger bore model roundslide - popular choice for large capacity single cylinder thumpers, classic motocross etc. Prices to be confirmed..
Regards
Denis Lovett
Proprietor
OKO Australia
http://www.oko-australia.com.au
By the way, we have new model roundslide OKOs available:
OKO 3000 - Now available in 28mm! Popular choice for classics and post classic trials bikes! Price to be confirmed..
OKO 3005 - Large bore roundslide - available in 32, 34, 36, 38 and 40mm! We have finally crumpled under the demand for a larger bore model roundslide - popular choice for large capacity single cylinder thumpers, classic motocross etc. Prices to be confirmed..
Regards
Denis Lovett
Proprietor
OKO Australia
http://www.oko-australia.com.au
Return to “News article discussion”
Who is online
Users browsing this forum: No registered users and 8 guests