Page 1 of 1

TY250B Clutch inner basket

Posted: Wed Dec 30, 2015 4:02 pm
by tjay7
Hi All,

when pulling apart my clutch the inner basket pressure bolt holes had some damage. When I went to reassemble one cracked completely.

Does anyone have another basked they would be willing to part with?
I have looked all over ebay etc and cant second hand or after market items.

Cheers

Re: TY250B Clutch inner basket

Posted: Wed Dec 30, 2015 4:09 pm
by tjay7
Photo attached

Re: TY250B Clutch inner basket

Posted: Wed Dec 30, 2015 5:09 pm
by tat ty
Quite likely to still function. Heavy duty plates and light springs.

Worth trying.

Alastair

Re: TY250B Clutch inner basket

Posted: Wed Dec 30, 2015 5:25 pm
by David Lahey
Yes Alastair is on track. Not even sure you need heavy springs. I have one that works fine with new plates and three standard springs. If you need to, those pegs can be heli-coiled if the thread is damaged, to get three good ones 120 degrees apart

Another other option is to have it (weld) repaired. I know of a TY250 clutch hub that was broken like that and successfully weld repaired by a friend of mine only a month or so ago

Re: TY250B Clutch inner basket

Posted: Wed Dec 30, 2015 6:55 pm
by tjay7
Thanks guys,

I have put it back together and getting some friction. I will have to do some minor adjustments tomorrow but I think I will be fine with the existing one.

Looking forward to taking it for a ride!

Cheers

Toby