Page 1 of 2

Italjet scott 350 parts and technical

Posted: Tue Feb 20, 2018 3:31 pm
by tried-them-all
Guys
I am attempting to get a rough example of an Italjet Scott 350 4 stroke trials bike running again. I need to know some service details such as how much oil goes into it and where? Plug type, tappet clearance, etc.

I know there are a few out there somewhere. Any parts considered.

thanks
Phil

Re: Italjet scott 350 parts and technical

Posted: Thu Feb 22, 2018 8:07 am
by Jon V8
There is a bloke who rides one in trials local to me,can't remember his name. Hopefully he will be at our next trial on March 11th,if I see him I'll ask if he has a manual or knows capacities and settings.
I remember seeing them brand new for about £1250, I even had a brochure for them somewhere,was quite tempted at the time.

Re: Italjet scott 350 parts and technical

Posted: Thu Feb 22, 2018 7:09 pm
by tried-them-all
thanks, I appreciate the help

Re: Italjet scott 350 parts and technical

Posted: Thu Feb 22, 2018 8:24 pm
by Rod
There was a couple of them getting around in Oz trials back in the day, mainly with a sidecar attached is how I remember them.
Try the Trials Central forum, bit more of an International audience over there, you might get a lead.

Try also an email to Steve Goode in the UK, he was an Italjet dealer and is still active.
https://stevegoodemotorcycles.weebly.com/

Re: Italjet scott 350 parts and technical

Posted: Thu Feb 22, 2018 9:08 pm
by Bully fanatic
If you send a PM to Chippy on here, he owns one. He is on the Twinshock and Classic forums. Have a look under Magazine Articles and Basket Cases. Graham.

Re: Italjet scott 350 parts and technical

Posted: Sat Feb 24, 2018 4:41 pm
by tried-them-all
thanks guys,

my bike did have a trials chair on it originally and came from South Australia. I got a response from the UK dealer telling me that italjet never supplied any manuals for the scott - which doesn't surprise me at all. I went to the Italjet factory in 2000 and couldn't get anything then either. So what did people do I wonder - just measure the oil when it came out, and check the tappet clearance when new?

Re: Italjet scott 350 parts and technical

Posted: Sun Feb 25, 2018 1:00 pm
by sprocket
hi,

give me a call i have information you require

sproket 0412256222

Re: Italjet scott 350 parts and technical

Posted: Wed May 02, 2018 9:35 pm
by Jon V8
I took this picture last weekend at a local VMCC autojumble, this bike belongs to a trials mate of mine,(I didn't know he owned it) he had it up for sale for £3495. Its never been used...
By coincidence the venue at Shepton Mallet was where I originally saw them for sale,company was Johnson's Cables.
Italjet.jpg
Italjet.jpg (155.33 KiB) Viewed 11243 times

Re: Italjet scott 350 parts and technical

Posted: Tue Apr 16, 2019 10:16 am
by italianguy
Hi guys I'm new to this forum as I've just acquired an Italjet Scott. I know this thread is a year or so old but I'm hoping to find some more information rather than just scouring ebay for bits and pieces. Thanks and I'll post a photo on here soon.
Cheers
Tony

Re: Italjet scott 350 parts and technical

Posted: Thu Jul 11, 2019 11:43 pm
by Sew22250
Hey all stew hear im in the same boat as tony new to the forum and have also just picked up a italjet scott 350 it seems to be all in good condition just chacing bit of info on it the guy tells me there were only 100 or so made and only 9 or so imported into aus i have been reading wat i can but im not convinced that they are that reare also im in search of a kick starter and mudgards any info be greatly appreciated.
Cheers stew