ty250A issues
Posted: Sun Dec 16, 2018 1:15 pm
Hi, I have a just purchased aTY250A which runs very well until it gets hot then dies and refuses to start until it cools down.
I had a TY175 with a similar issue that was rectified by Mr Chapman by putting in an older set of points because evidently in the newer points the plastics swell and thus close the points until cool.
Is there any other known issues I should look for before investigating the points, and is there any recommended points that perform as per the originals.
I don't really want to spend big on an electric ignition if I don't have to.
I had a TY175 with a similar issue that was rectified by Mr Chapman by putting in an older set of points because evidently in the newer points the plastics swell and thus close the points until cool.
Is there any other known issues I should look for before investigating the points, and is there any recommended points that perform as per the originals.
I don't really want to spend big on an electric ignition if I don't have to.