Italjet scott 350 parts and technical

Need help finding information or parts for that old machine in your shed? Someone in here will know!

Moderator: Moderators

tried-them-all
Junior participant
Junior participant
Posts: 3
Joined: Tue Feb 20, 2018 3:20 pm
Bike: italjet

Italjet scott 350 parts and technical

Postby tried-them-all » Tue Feb 20, 2018 3:31 pm

Guys
I am attempting to get a rough example of an Italjet Scott 350 4 stroke trials bike running again. I need to know some service details such as how much oil goes into it and where? Plug type, tappet clearance, etc.

I know there are a few out there somewhere. Any parts considered.

thanks
Phil



Jon V8
Expert participant
Expert participant
Posts: 209
Joined: Tue Dec 28, 2010 10:44 pm
Bike: Ty250,Ht5.
Club: Bath Classic
Location: Near Bath,SW UK.

Re: Italjet scott 350 parts and technical

Postby Jon V8 » Thu Feb 22, 2018 8:07 am

There is a bloke who rides one in trials local to me,can't remember his name. Hopefully he will be at our next trial on March 11th,if I see him I'll ask if he has a manual or knows capacities and settings.
I remember seeing them brand new for about £1250, I even had a brochure for them somewhere,was quite tempted at the time.



tried-them-all
Junior participant
Junior participant
Posts: 3
Joined: Tue Feb 20, 2018 3:20 pm
Bike: italjet

Re: Italjet scott 350 parts and technical

Postby tried-them-all » Thu Feb 22, 2018 7:09 pm

thanks, I appreciate the help



Rod
Expert participant
Expert participant
Posts: 252
Joined: Sat May 22, 2010 7:22 am
Bike: GG & Fantic.
Club: MTCQ
Location: Brisbane,Qld. OZ

Re: Italjet scott 350 parts and technical

Postby Rod » Thu Feb 22, 2018 8:24 pm

There was a couple of them getting around in Oz trials back in the day, mainly with a sidecar attached is how I remember them.
Try the Trials Central forum, bit more of an International audience over there, you might get a lead.

Try also an email to Steve Goode in the UK, he was an Italjet dealer and is still active.
https://stevegoodemotorcycles.weebly.com/



Bully fanatic
Expert participant
Expert participant
Posts: 278
Joined: Mon Apr 11, 2011 4:56 pm
Bike: Bultaco sherpa T
Club: westerndistricttrialsclub

Re: Italjet scott 350 parts and technical

Postby Bully fanatic » Thu Feb 22, 2018 9:08 pm

If you send a PM to Chippy on here, he owns one. He is on the Twinshock and Classic forums. Have a look under Magazine Articles and Basket Cases. Graham.



tried-them-all
Junior participant
Junior participant
Posts: 3
Joined: Tue Feb 20, 2018 3:20 pm
Bike: italjet

Re: Italjet scott 350 parts and technical

Postby tried-them-all » Sat Feb 24, 2018 4:41 pm

thanks guys,

my bike did have a trials chair on it originally and came from South Australia. I got a response from the UK dealer telling me that italjet never supplied any manuals for the scott - which doesn't surprise me at all. I went to the Italjet factory in 2000 and couldn't get anything then either. So what did people do I wonder - just measure the oil when it came out, and check the tappet clearance when new?



sprocket
Junior participant
Junior participant
Posts: 1
Joined: Sun Feb 18, 2018 5:18 pm

Re: Italjet scott 350 parts and technical

Postby sprocket » Sun Feb 25, 2018 1:00 pm

hi,

give me a call i have information you require

sproket 0412256222



Jon V8
Expert participant
Expert participant
Posts: 209
Joined: Tue Dec 28, 2010 10:44 pm
Bike: Ty250,Ht5.
Club: Bath Classic
Location: Near Bath,SW UK.

Re: Italjet scott 350 parts and technical

Postby Jon V8 » Wed May 02, 2018 9:35 pm

I took this picture last weekend at a local VMCC autojumble, this bike belongs to a trials mate of mine,(I didn't know he owned it) he had it up for sale for £3495. Its never been used...
By coincidence the venue at Shepton Mallet was where I originally saw them for sale,company was Johnson's Cables.
Italjet.jpg
Italjet.jpg (155.33 KiB) Viewed 6866 times



italianguy
Junior participant
Junior participant
Posts: 1
Joined: Tue Apr 16, 2019 9:31 am
Bike: Italjet
Club: CIMAA
Location: Australia

Re: Italjet scott 350 parts and technical

Postby italianguy » Tue Apr 16, 2019 10:16 am

Hi guys I'm new to this forum as I've just acquired an Italjet Scott. I know this thread is a year or so old but I'm hoping to find some more information rather than just scouring ebay for bits and pieces. Thanks and I'll post a photo on here soon.
Cheers
Tony



Sew22250
Junior participant
Junior participant
Posts: 1
Joined: Thu Jul 11, 2019 11:28 pm
Bike: Cr250
Club: Ajs
Location: Australia

Re: Italjet scott 350 parts and technical

Postby Sew22250 » Thu Jul 11, 2019 11:43 pm

Hey all stew hear im in the same boat as tony new to the forum and have also just picked up a italjet scott 350 it seems to be all in good condition just chacing bit of info on it the guy tells me there were only 100 or so made and only 9 or so imported into aus i have been reading wat i can but im not convinced that they are that reare also im in search of a kick starter and mudgards any info be greatly appreciated.
Cheers stew




Return to “Twinshock & Classic Trials”

Who is online

Users browsing this forum: No registered users and 12 guests