TY 250 Improvements
Posted: Mon Jun 25, 2007 8:47 pm
Hi
I have a TY250A that I am running in the Vic troy series. It goes OK
but I am no expert in the suspension set up or what can be done to improve them.
At present I have standard fork springs with 17mm preload 7.5w oil 175cc and the forks are down in the clamps 6mm. Rear end has steel falcon shocks 340mm long. Footpegs have been lowered. Flywheel is weighted.
One problem I need to fix is the baffle in the main pipe is rattling about. (bike still runs ok). Any one know wat side it is supposed to be fixed to?
I would appreciate any advice on how to improve the handling power delivery, weight reduction etc
I have a TY250A that I am running in the Vic troy series. It goes OK
but I am no expert in the suspension set up or what can be done to improve them.
At present I have standard fork springs with 17mm preload 7.5w oil 175cc and the forks are down in the clamps 6mm. Rear end has steel falcon shocks 340mm long. Footpegs have been lowered. Flywheel is weighted.
One problem I need to fix is the baffle in the main pipe is rattling about. (bike still runs ok). Any one know wat side it is supposed to be fixed to?
I would appreciate any advice on how to improve the handling power delivery, weight reduction etc