KICK START LEVER FOR 1984 Honda TLR200

Need help finding information or parts for that old machine in your shed? Someone in here will know!

Moderator: Moderators

mrgor
C grade participant
C grade participant
Posts: 33
Joined: Mon Feb 19, 2007 9:23 pm
Location: MELBOURNE

KICK START LEVER FOR 1984 Honda TLR200

Postby mrgor » Sun Mar 08, 2015 8:16 pm

Hello, Looking to buy a Kick Start Lever for a 1984 Honda TLR200.
Ours split today at the Spline bolt on part--old metal I guess.
Dealers not much help with listings for TLR200.
Bit nervous about buying an aftermarket one from Overseas on EBay etc.
Would appreciate any advise---start of Trials season getting close.
Thank You, Ron S



Langy
Junior participant
Junior participant
Posts: 11
Joined: Wed Aug 15, 2012 10:01 pm
Bike: TLR/4RT
Club: AJS
Location: S.A.

Re: KICK START LEVER FOR 1984 Honda TLR200

Postby Langy » Mon Mar 09, 2015 7:07 pm

Hi Ron,
I have bought lots of new genuine Honda parts from http://www.partzilla.com/ over several different shipments (including 3 kickstarts) , and have been very reliable.
Try their parts listing for 1986 TLR 200 and remember the American TLR is slightly different from the Aussie version (smaller forks etc)
Cheers Langy



joey
Junior participant
Junior participant
Posts: 3
Joined: Fri Sep 26, 2014 10:06 am
Bike: Scorpa

Re: KICK START LEVER FOR 1984 Honda TLR200

Postby joey » Tue Mar 10, 2015 9:24 pm

Hi I fitted a xr200r 2002 kick start to my 1983 Tlr200
Joe



User avatar
Julz
B grade participant
B grade participant
Posts: 60
Joined: Wed Feb 23, 2011 8:04 pm
Bike: SWM TL320
Club: Twinshock Trials NZ
Location: Kapiti Coast, Wellington, NZ

Re: KICK START LEVER FOR 1984 Honda TLR200

Postby Julz » Wed Mar 11, 2015 7:42 pm

Cheap Chinese replicas are easily available on this side of the Tasman: http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-856053559.htm
The XR200 kick start is the same part.



mrgor
C grade participant
C grade participant
Posts: 33
Joined: Mon Feb 19, 2007 9:23 pm
Location: MELBOURNE

Re: KICK START LEVER FOR 1984 Honda TLR200

Postby mrgor » Thu Mar 12, 2015 9:04 am

Thank you for your suggestions re using the XR200 Kick Start Lever.
My only concern is that they do not have the Stop cast into the spline section.
I am told if the Kick Start lever swings down to far, it can damage the Internals and possibly gouge a bit out of the cases.
Does anyone know if this is correct ?
Thank You,
Ron S




Return to “Twinshock & Classic Trials”

Who is online

Users browsing this forum: Google [Bot] and 10 guests