Page 1 of 1

3D print your own front brake cable guide

Posted: Sun Nov 17, 2019 4:49 pm
by JimsShed
Hi all,
My Beta has the brake guide integrated into the headlight cowling. So of course when I put my name plate on...no guide.
My solution has been to print one. If you have a 3D printer, you can help yourself to one I designed that has the same press-on attachment as the original. This should work on most brands of bike.
You can find the .STL for the guide here: https://www.thingiverse.com/thing:3981690


Cheers, Jim