Yeah it's Sunday arvo and no riding so I'm hiding in the shed.
Following on from the cable guide, here's another 3D printable item that's specific to Beta EVO owners who want to mount their mapping switch to a name plate after removing the headlight.
.STL files can be found here https://www.thingiverse.com/thing:3981747
Jim
3D print your own Beta EVO mapping switch bracket
Moderator: Moderators
3D print your own Beta EVO mapping switch bracket
- Attachments
-
- 20191117_160109.jpg (253.26 KiB) Viewed 8378 times
-
- 20191117_160035.jpg (285.69 KiB) Viewed 8378 times
-
- Junior participant
- Posts: 6
- Joined: Fri Nov 22, 2019 7:44 am
- Bike: Buying a project
- Location: Australia
Re: 3D print your own Beta EVO mapping switch bracket
Any recommendations of affordable 3d printers which will print up to a size suitable for bike bits and pieces?
Re: 3D print your own Beta EVO mapping switch bracket
I have an Ender 3 printer. They're very popular and about AUD $300. To print these parts I'd recommend PETG filament or ABS. If you get a printer, be prepared for a world of variables (software settings, filaments, temperature settings etc), but I found it a lot of fun.
To actually design the parts, start with the free online software called TinkerCad.
To actually design the parts, start with the free online software called TinkerCad.
Who is online
Users browsing this forum: No registered users and 18 guests