ty250b airfilter

Got a technical question? Ask it in here.

Moderator: Moderators

Fred
Junior participant
Junior participant
Posts: 3
Joined: Mon Jan 02, 2006 9:42 pm
Location: llandilo

ty250b airfilter

Postby Fred » Thu Jan 26, 2006 3:11 pm

could somebody please tell me how to get to my airfilter on my ty250b allso what is the right fuel/oil mixture i run it at 50/1 :?: :?:



PA
2IC
2IC
Posts: 472
Joined: Fri Jun 06, 2003 9:55 am
Bike: Beta EVO
Club: AJS Moto Trial Club of SA Inc.
Location: South Australia

Postby PA » Thu Jan 26, 2006 3:13 pm

If it's the same as the TY175 take the seat off and there is the Air Filter.

50:1 using a good oil is fine.



Stu
Expert participant
Expert participant
Posts: 480
Joined: Fri Jul 23, 2004 11:28 pm
Bike: SHerco, TY250
Club: Wollongong
Location: wollongong

Postby Stu » Thu Jan 26, 2006 10:17 pm

Fred, I own one of those wonderful Twin shocks!
Just undo the 2 10mm bolts holding the seat, lift off seat. The air filter is under the seat. undo the 3 screws, take out filter(careful you don't dislodge any dirt) and clean. When putting the filter back in, make sure it fits properly into the carby 'neck'. Easy.
I had to get another filter made, cost was about $10.00 from the local bike shop.


Feet up, as always!


Return to “Technical help”

Who is online

Users browsing this forum: No registered users and 14 guests