Air leak from spokes

Got a technical question? Ask it in here.

Moderator: Moderators

User avatar
The Hell Team
Dealer
Dealer
Posts: 399
Joined: Sat Oct 25, 2003 11:31 am
Location: Between Hell and High Water.....

Re: Air leak from spokes

Postby The Hell Team » Wed Jul 30, 2008 10:21 pm

There is now a PDF file tech essay on The Hell Team website all about rim band replacement.
Hope this helps,
http://www.thehellteam.com/catalogue/c11/c20/c27/c105


We can crate and freight bikes Australia wide for very reasonable rates. Ring or email with your location for freight quote.
The Hell Team Trials Store
02.8424.6400
0418.415.129
whoever@thehellteam.com
http://www.thehellteam.com

User avatar
Gary B
Expert participant
Expert participant
Posts: 227
Joined: Tue Nov 11, 2003 8:05 pm
Bike: Gasser ! TLR 250, TY
Club: Wollongong MCC
Location: Kiama NSW (God's Country)
Location: Illawarra NSW

Re: Air leak from spokes

Postby Gary B » Thu Jul 31, 2008 8:59 pm

Richard,
I've just had similar dramas.
First off, if you ever take a trials (tubeless) wheel to a motorcycle shop DO NOT let them touch the valve stem.
I've had Gas Gas bikes with tubeless rims since '96 & never had a problem as I always did the tyre changes myself.
Little while ago I was running short of time so I dropped my wheel into a bike shop to get the tyre turned around.
The guy loosened off the valve stem (as you would with any TUBE type wheel).
This disturbed the valve stem in the rim tape (tore a little bit out of it).
So $30+ for a new rim tape & did it myself.
The Montesa (Honda) bikes have a rim that doesn't use a rim tape, as do the new Gas Gas Raga replica's.
I've also heard on the grapevine that the 2009 Gas Gas bikes have a new rim tape with the valve molded into it.
I also keep a small Co2 cylinder inflater in my bum bag if I get any slow leaks through the day.

8)


Gary B. from Wollongong MCC.
Now the Old Man in "Team Boniface"
:?

User avatar
The Hell Team
Dealer
Dealer
Posts: 399
Joined: Sat Oct 25, 2003 11:31 am
Location: Between Hell and High Water.....

Re: Air leak from spokes

Postby The Hell Team » Fri Aug 01, 2008 4:37 am

Gary
All new Morad rims exported from June 08 now have the rim band with a "moulded in" valve stem. Morad rims are standard fitment on Scorpa and Sherco as well.

paul


We can crate and freight bikes Australia wide for very reasonable rates. Ring or email with your location for freight quote.
The Hell Team Trials Store
02.8424.6400
0418.415.129
whoever@thehellteam.com
http://www.thehellteam.com

gordonmichaellee
B grade participant
B grade participant
Posts: 92
Joined: Sun Jul 08, 2007 4:21 pm
Location: Byron Bay

Re: Air leak from spokes

Postby gordonmichaellee » Sat Aug 02, 2008 8:34 am

I have been through this process myself and found the best metod to be using soggy soap ( the stuff soap turns to when the kids have left it in the bath ). It causes no damage to alloy or rubber. I did mine a year or two ago and it has been fine.




Return to “Technical help”

Who is online

Users browsing this forum: No registered users and 20 guests