Handle bar risers for ty
Moderator: Moderators
-
- Junior participant
- Posts: 2
- Joined: Sun Nov 23, 2008 4:15 am
- Bike: 85 ty 350
- Club: victoria motorcycle club (vmc)
Handle bar risers for ty
Hi , can anybody tell me if there are handlebar risers for a 85 ty350 out there. I ride enduro bikes and am new to trials and I feel that I'm leaning over the bars too far.Thanks Rodger
-
- Champion
- Posts: 4062
- Joined: Thu Jun 05, 2003 7:01 pm
- Bike: Many Twinshocks
- Club: CQTC Inc, RTC Inc
- Location: Gladstone, Queensland
Re: Handle bar risers for ty
rodger
A useful mod for all the air-cooled monoshock Yamaha TY models is to lower the footpegs. This will make the ergos much nicer and improve your stationary balance.
Youll find lots of useful info in these two forums about your bike
http://www.trialscentral.com/forums/ind ... owforum=39
http://www.trialscentral.com/forums/ind ... owforum=12
David
A useful mod for all the air-cooled monoshock Yamaha TY models is to lower the footpegs. This will make the ergos much nicer and improve your stationary balance.
Youll find lots of useful info in these two forums about your bike
http://www.trialscentral.com/forums/ind ... owforum=39
http://www.trialscentral.com/forums/ind ... owforum=12
David
relax, nothing is under control
-
- Junior participant
- Posts: 2
- Joined: Sun Nov 23, 2008 4:15 am
- Bike: 85 ty 350
- Club: victoria motorcycle club (vmc)
Re: Handle bar risers for ty
Thanks Dave, funny thing I am taking the ty to my neighbours place next week to remove the old pegs and putting a extra set from my ktm on it. I'll lower them 1.5 to 2 inches, I hope this dosn't get me stuck on logs. Thanks again Rodger
- Gary B
- Expert participant
- Posts: 227
- Joined: Tue Nov 11, 2003 8:05 pm
- Bike: Gasser ! TLR 250, TY
- Club: Wollongong MCC
- Location: Kiama NSW (God's Country)
- Location: Illawarra NSW
Re: Handle bar risers for ty
Rodger,
If the TY still has the std low bars try some taller Renthals.
You can now also buy bar risers to go 7/8" bar to 7/8" bar or 7/8" bar to 1" 1/8" (Fat Bar).
Most reasonable bike shops would keep these.
If not tell them to look in the MCS book or try Ballards website.
Hope this helps
If the TY still has the std low bars try some taller Renthals.
You can now also buy bar risers to go 7/8" bar to 7/8" bar or 7/8" bar to 1" 1/8" (Fat Bar).
Most reasonable bike shops would keep these.
If not tell them to look in the MCS book or try Ballards website.
Hope this helps
Gary B. from Wollongong MCC.
Now the Old Man in "Team Boniface"
Now the Old Man in "Team Boniface"
- The Hell Team
- Dealer
- Posts: 399
- Joined: Sat Oct 25, 2003 11:31 am
- Location: Between Hell and High Water.....
Re: Handle bar risers for ty
The Hell Team stock 7/8th to 1 inch converters that also raise the bars. And a selection of Renthal 7/8th bars in 5.5 inch and 6.5 inch rise, and new style inch tapered bars.
Give us a call.
Give us a call.
We can crate and freight bikes Australia wide for very reasonable rates. Ring or email with your location for freight quote.
The Hell Team Trials Store
02.8424.6400
0418.415.129
whoever@thehellteam.com
http://www.thehellteam.com
The Hell Team Trials Store
02.8424.6400
0418.415.129
whoever@thehellteam.com
http://www.thehellteam.com
Who is online
Users browsing this forum: No registered users and 15 guests