OKO flatslide

Got a technical question? Ask it in here.

Moderator: Moderators

gordonmichaellee
B grade participant
B grade participant
Posts: 92
Joined: Sun Jul 08, 2007 4:21 pm
Location: Byron Bay

OKO flatslide

Postby gordonmichaellee » Sat Dec 13, 2008 7:55 am

Hi all, can anyone tell me if the OKO flatslide you were all talking about recently is the same as the ones on ebay at the moment. (Ebay item 120344676119 ) ( carbaretor for race only ). and will it work well on my monty 315r?

Cheers Gordo



User avatar
OKOAustralia
C grade participant
C grade participant
Posts: 24
Joined: Tue Aug 19, 2008 7:13 am
Bike: Any I can find
Location: Brisbane Australia

Re: OKO flatslide

Postby OKOAustralia » Sat Dec 13, 2008 9:39 am

Gordon,

1. Make sure it is not an OKO or SOKO or other brand copy from China. Genuine OKOs are manufactured elsewhere and conform with ISO.
2. The advertised jetting will definetly not suit trials. The seller makes no mention of the slide and needle which are also critical for your application.
3. A genuine OKO retails for much less than $280.
4. The throttle guide top may not be suitable for the Cota.
5. Dont be fooled by comments "the OKO is a copy of the PWK Keihin". The OKO/Keihin both use flatslide carburettor design and have similar dimensions yet there are significant differences.
6. Does the seller offer any warranty? Parts back up? Technical advise specific to trials?

Hope this helps,
OKO Australia
http://www.oko-australia.com.au



gordonmichaellee
B grade participant
B grade participant
Posts: 92
Joined: Sun Jul 08, 2007 4:21 pm
Location: Byron Bay

Re: OKO flatslide

Postby gordonmichaellee » Sat Dec 13, 2008 8:02 pm

Thanks mate, it looks like a tin of worms that I don't want / need to open so I'll stick with what I've got until I know it needs changing. Out of interest what would one cost from your good self for my bike?

Cheers Gordo



User avatar
OKOAustralia
C grade participant
C grade participant
Posts: 24
Joined: Tue Aug 19, 2008 7:13 am
Bike: Any I can find
Location: Brisbane Australia

Re: OKO flatslide

Postby OKOAustralia » Sun Dec 14, 2008 7:49 am

Please attach a photo (taken from LHS) of your bike so we can see the model. Need a clear view of the existing carb set up.




Return to “Technical help”

Who is online

Users browsing this forum: Bing [Bot] and 21 guests