Piston dimensions Honda

Got a technical question? Ask it in here.

Moderator: Moderators

LOZZA
Junior participant
Junior participant
Posts: 3
Joined: Mon Dec 28, 2009 8:58 am
Bike: TLR250F
Club: Classic Japanese Australia

Piston dimensions Honda

Postby LOZZA » Fri Jan 08, 2010 1:49 pm

Can anyone help with the piston dimensions for a 1985 TLR250F ?
I need the measurements of the -: Diameter
Piston pin diameter
Piston pin center to crown
Piston pin to skirt
Overhaul length

So I can hopefully get one made to suit this modle and finish the restoration



Stork955
B grade participant
B grade participant
Posts: 68
Joined: Sun Apr 16, 2006 9:04 am
Location: Tasmania

Re: Piston dimensions Honda

Postby Stork955 » Sat Jan 09, 2010 7:34 am

Gday, cant help with dimensions, but these guys have RTL ones which (apparently) are the same as TLR. I know nothing about this myself...

http://www.lewisportusa.com/Images/rest ... _parts.htm

If you can find an actual part number for piston or ring set I may be able to cross-reference them with other Honda models.

Cheers,

Stork



LOZZA
Junior participant
Junior participant
Posts: 3
Joined: Mon Dec 28, 2009 8:58 am
Bike: TLR250F
Club: Classic Japanese Australia

Re: Piston dimensions Honda

Postby LOZZA » Sat Jan 09, 2010 8:23 am

Thanks for the help.I have been able to get Piston rings 131A1-KR9-003 and Pin 13101-KR9-000 But no luck with the piston 13101-KR9-003.
So any reference you can supply would be greatly appreciated. :VIC:



David Lahey
Champion
Champion
Posts: 4062
Joined: Thu Jun 05, 2003 7:01 pm
Bike: Many Twinshocks
Club: CQTC Inc, RTC Inc
Location: Gladstone, Queensland

Re: Piston dimensions Honda

Postby David Lahey » Sat Jan 09, 2010 9:56 am

Lozza, No idea if this will help you but I think there was a TLR250 barrel and piston for sale on eBay a few months ago located somewhere in northern NSW. I remember it because it was such a rare thing to see advertised.
David


relax, nothing is under control

Stork955
B grade participant
B grade participant
Posts: 68
Joined: Sun Apr 16, 2006 9:04 am
Location: Tasmania

Re: Piston dimensions Honda

Postby Stork955 » Sat Jan 09, 2010 5:51 pm

Gday Lozza, no go with my crossreference. It looked at me blankly...There isnt any KR9 parts in there, which means its pretty rare. Have you tried David Silver spares in the UK? They are pretty good, I have had them supply stuff for all sorts of weird bikes over the last couple of years. Might be worth an email. Or maybe Econohonda (?) in New Zealand.

www.davidsilverspares.com

Cheers,

Stork



User avatar
Starky
A grade participant
A grade participant
Posts: 148
Joined: Sat Jul 29, 2006 7:11 pm
Bike: TY175, TY250
Location: Maryborough

Re: Piston dimensions Honda

Postby Starky » Sun Jan 10, 2010 9:57 am

Try these guys, they do a lot of Honda stuff, read half way down the page to where they talk about special piston orders.
http://www.classictrial.co.uk/services.html


Starky
When competing in a trial, I don't suffer from nerves, I get way too excited for that stuff!!!!


Return to “Technical help”

Who is online

Users browsing this forum: No registered users and 18 guests