My BETA REV3 200
Moderator: Moderators
-
- B grade participant
- Posts: 51
- Joined: Mon Sep 08, 2014 6:04 pm
- Bike: REV3 200
- Location: Mudgee NSW
Re: My BETA REV3 200
Thanks man.. I figured as much but didn't really want to have to take the damn carb off it again. They are a pain the back-side to get back on!
-
- B grade participant
- Posts: 51
- Joined: Mon Sep 08, 2014 6:04 pm
- Bike: REV3 200
- Location: Mudgee NSW
Re: My BETA REV3 200
OK, so.. Today I removed the carb + stripped down, cleaned with carb cleaner and blew out with compressed air. Let it all dry and reinstalled. Same issue
I'm really at a loss now?? I've attached a video to try and demonstrate the issue better.
https://youtu.be/9YwwO1HOeI8
I'm really at a loss now?? I've attached a video to try and demonstrate the issue better.
https://youtu.be/9YwwO1HOeI8
- Betaman
- Expert participant
- Posts: 326
- Joined: Fri Jun 06, 2008 6:52 pm
- Bike: BETA! wtf ;0)
- Club: AJS Mcc
- Location: Mt Torrens SA
Re: My BETA REV3 200
The next thing to look at is the head...if it running on then the head is probably carboned up.....and while your there decoke and clean out the collected carbon and oil from the whole exhaust system.
Just my 2 cents worth.....or was that 1 cent???!!!
http://throttlethrasher.blogspot.com.au/
My Videos - My Club
http://throttlethrasher.blogspot.com.au/
My Videos - My Club
- Betaman
- Expert participant
- Posts: 326
- Joined: Fri Jun 06, 2008 6:52 pm
- Bike: BETA! wtf ;0)
- Club: AJS Mcc
- Location: Mt Torrens SA
Re: My BETA REV3 200
...unless you have an air leak as well
Just my 2 cents worth.....or was that 1 cent???!!!
http://throttlethrasher.blogspot.com.au/
My Videos - My Club
http://throttlethrasher.blogspot.com.au/
My Videos - My Club
- TRIALTECH
- Dealer
- Posts: 109
- Joined: Thu Jun 04, 2009 6:56 am
- Bike: Beta Scorpa Sherco
- Location: Brisbane
Re: My BETA REV3 200
so it sounds like it's leaning out....
hard to tell just from a video, check that the fuel cap is allowing the tank to vent otherwise as the fuel is consumed a vacuum develops and reduces fuel flow thus leaning it out. the not so obvious stuff like this needs to be eliminated first.
hard to tell just from a video, check that the fuel cap is allowing the tank to vent otherwise as the fuel is consumed a vacuum develops and reduces fuel flow thus leaning it out. the not so obvious stuff like this needs to be eliminated first.
TRIALTECHMOTO
Qld Scorpa / Sherco / Beta Dealer
New and Used bikes
Workshop (Qualified Mechanic 30yrs experience)
Spares and Accessories
Facebook Messenger 'trialtechmoto'
sales@trialtech.com.au
http://www.ttmoto.com.au
0491.075.653
Qld Scorpa / Sherco / Beta Dealer
New and Used bikes
Workshop (Qualified Mechanic 30yrs experience)
Spares and Accessories
Facebook Messenger 'trialtechmoto'
sales@trialtech.com.au
http://www.ttmoto.com.au
0491.075.653
-
- B grade participant
- Posts: 51
- Joined: Mon Sep 08, 2014 6:04 pm
- Bike: REV3 200
- Location: Mudgee NSW
Re: My BETA REV3 200
Thanks for the feedback peeps.. Completly stripped down the carb, soaked in cleaner and blew out all components with compressor. Put it together and it's running great!
Who is online
Users browsing this forum: Bing [Bot] and 13 guests