2016 Sherco Factory 300
Bike has only had about 5 Competitions and 1 Practice days on it from new from Motocentral.
Bike has had the shock linkages regreased when I 1st got it and serviced 3 times while I have owned it.
It is pretty much stock as in this link:
http://www.sherco.com/news-reader/items ... ctory.html
I have changed some parts on the bike they are as follows:
CSP Snail Cams, Idle Adjuster, Fuel Cap, Brake pedal And Stock parts.
Jitsie twin stage air filter and stock parts.
S3 Bar ends, reach and play adjusters and stock parts.
Spare brake pads(3x rear and 1x front) and spare sticker kit (Glossy portion).
Spare pair of levers
2 Spare Airbox top halves 1x new and 1x broken.
Spare fork Brace
Frame, swingarm, fork, crankcase, clutch case and header protectors on it.
Bike is located in Redbank Plains, QLD
Contact me on 0435474931, please text first as I am unable to call on weekdays due to work.
Advertise your trials bike(s) here.
2 posts • Page 1 of 1
- Junior participant
- Posts: 19
- Joined: Fri Feb 15, 2013 12:36 pm
- Club: MTCQ
- Bike: Sherco Factory 300
- 23770150_1706464229398045_1445292403_o.jpg (1.83 MiB) Viewed 893 times
- 23798448_1706464049398063_1643304607_o.jpg (1.94 MiB) Viewed 893 times
- 23798326_1706464172731384_926279230_o.jpg (1.23 MiB) Viewed 893 times
- 23770404_1706464179398050_197589210_o.jpg (1.78 MiB) Viewed 893 times
- 23770400_1706464039398064_733398778_o (1).jpg (1.91 MiB) Viewed 893 times
- 23770150_1706464206064714_1958896928_o.jpg (1.74 MiB) Viewed 893 times
Who is online
Users browsing this forum: No registered users and 2 guests