40mm Marzocchi fork tool

Bikes, parts and anything else you need.

Moderator: Moderators

Glen N
Junior participant
Junior participant
Posts: 12
Joined: Sat Aug 25, 2018 7:23 am
Bike: TXT250 & Monty 247
Location: Highvale

40mm Marzocchi fork tool

Postby Glen N » Fri Jan 11, 2019 7:56 pm

After a marzocchi 40mm tool to remove the top fork caps, caps have small holes in them.

Any ideas where I can get one?



User avatar
The Hell Team
Dealer
Dealer
Posts: 330
Joined: Sat Oct 25, 2003 11:31 am
Location: Between Hell and High Water.....
Contact:

Re: 40mm Marzocchi fork tool

Postby The Hell Team » Sat Jan 12, 2019 11:20 am

Use a pin spanner - works fine.
Ebay has lots, just order the correct pin diameter.
Marzocchi don't have a tool available that I know of - and I have looked! Ended up making one.
Attachments
pin_spanner_wrench.jpg
pin_spanner_wrench.jpg (36.47 KiB) Viewed 331 times


We can crate and freight bikes Australia wide for very reasonable rates. Ring or email with your location for freight quote.
The Hell Team Trials Store
02.8424.6400
0418.415.129
[email protected]
http://www.thehellteam.com

pop
Expert participant
Expert participant
Posts: 216
Joined: Tue Mar 15, 2011 11:40 am
Bike: klx

Re: 40mm Marzocchi fork tool

Postby pop » Sat Jan 12, 2019 12:07 pm

I can remember screwing in 2 small allen head screws and using a flat bit of steel to open and close.



User avatar
The Hell Team
Dealer
Dealer
Posts: 330
Joined: Sat Oct 25, 2003 11:31 am
Location: Between Hell and High Water.....
Contact:

Re: 40mm Marzocchi fork tool

Postby The Hell Team » Sat Jan 12, 2019 1:54 pm

Or if you work on them regularly, make one like this.
Attachments
IMG_7929.jpg
IMG_7929.jpg (177.52 KiB) Viewed 310 times
IMG_7927.jpg
IMG_7927.jpg (203.88 KiB) Viewed 310 times


We can crate and freight bikes Australia wide for very reasonable rates. Ring or email with your location for freight quote.
The Hell Team Trials Store
02.8424.6400
0418.415.129
[email protected]
http://www.thehellteam.com

Glen N
Junior participant
Junior participant
Posts: 12
Joined: Sat Aug 25, 2018 7:23 am
Bike: TXT250 & Monty 247
Location: Highvale

Re: 40mm Marzocchi fork tool

Postby Glen N » Sun Jan 13, 2019 9:31 pm

Thanks, got a pin spanner and then filed pins down to match. Both caps came off easily. Thanks again.




Return to “Wanted”

Who is online

Users browsing this forum: No registered users and 1 guest