Hi Everyone,
WELL
Judging by responses and phone calls, I get the feeling there are a few people who want to look in my bike shed! Some questions I can answer now, firstly I will sell some bits and have done already. Most cosmetic bits and easily lost or broken pieces I will keep. I ride all of my bikes on a rotation depending on the mood. Recently Sherco Queensland did a search looking for a rear brake lever for TY 250A. A lot of people replied and tried to help, but no one could! I looked in my parts and had 4 off, to me this doesn't make sense. So, I am happy to swap or sell surplus parts, prefering to swap as someone may be able to help me with something I need as well, I see this as win win. I am compiling a want list and will add to this thread when complete.
I thought that laying all my cards on the table would stimulate interest. Yes it did!
Basket Cases
Moderator: Moderators
- Greg Harding
- Golden Basket of Smiles
- Posts: 885
- Joined: Tue Mar 03, 2009 7:33 pm
- Bike: NUMEROUS
- Club: LRMTC & SQTA
Re: Basket Cases
2017 Newsflash: RUST IS THE NEW BLING !
Team Hardwood, the only licenced trials riders in Coffs Harbour!
Miles of Smiles
Greg Harding
Team Hardwood, the only licenced trials riders in Coffs Harbour!
Miles of Smiles
Greg Harding
-
- Expert participant
- Posts: 480
- Joined: Fri Jul 23, 2004 11:28 pm
- Bike: SHerco, TY250
- Club: Wollongong
- Location: wollongong
Re: Basket Cases
Amazing! not only is this bloke a winner and a builder of Trials sections, but a good bloke too!
Feet up, as always!
- Sherco Qld
- Dealer
- Posts: 79
- Joined: Thu Nov 09, 2006 10:10 pm
- Location: Gold Coast
Re: Basket Cases
Talking about Basket Cases,here's a RL250 for sale is S.A.
http://cgi.ebay.com.au/SUZUKI-RL250-TRI ... 7C294%3A50
http://cgi.ebay.com.au/SUZUKI-RL250-TRI ... 7C294%3A50
Sherco Qld
0408716428
www.Sherco-Qld.com.au
0408716428
www.Sherco-Qld.com.au
- Greg Harding
- Golden Basket of Smiles
- Posts: 885
- Joined: Tue Mar 03, 2009 7:33 pm
- Bike: NUMEROUS
- Club: LRMTC & SQTA
Re: Basket Cases
Hi Everyone,
This is my want list of parts, I realise some of these parts may be non-existant!
ALPINA 213(My 350 Alpina has Sherpa T tank and seat)
Rear sprocket with more than 50 teeth (520)
Rear brake backing plate and shoes
TY 250C
Seat base, apparently D and E models are the same
Blue plastic side cover
Magneto cover
Rear guard
Air cleaner boot
Fork brace
MONTESA 349 (RED)
Conrod kit
Gasket set
Front and rear spokes
Rear guard
Rear sprocket (520)
Air cleaner boot
RL 250
Air cleaner boot
Rear sprocket (520)
Engine covers that have clutch on right hand side at front
FANTIC 250 Bike has white plastics, disc brake front end, drum rear and monoshock
Cylinder head with no broken fins
Air cleaner boot
Rear sprocket (520)
TL 125
Plastic side covers
Black plastic innerguard
If anyone can help me, please let me know. If you need parts from my basket case list, talk to me and hopefully we can swap?
This is my want list of parts, I realise some of these parts may be non-existant!
ALPINA 213(My 350 Alpina has Sherpa T tank and seat)
Rear sprocket with more than 50 teeth (520)
Rear brake backing plate and shoes
TY 250C
Seat base, apparently D and E models are the same
Blue plastic side cover
Magneto cover
Rear guard
Air cleaner boot
Fork brace
MONTESA 349 (RED)
Conrod kit
Gasket set
Front and rear spokes
Rear guard
Rear sprocket (520)
Air cleaner boot
RL 250
Air cleaner boot
Rear sprocket (520)
Engine covers that have clutch on right hand side at front
FANTIC 250 Bike has white plastics, disc brake front end, drum rear and monoshock
Cylinder head with no broken fins
Air cleaner boot
Rear sprocket (520)
TL 125
Plastic side covers
Black plastic innerguard
If anyone can help me, please let me know. If you need parts from my basket case list, talk to me and hopefully we can swap?
2017 Newsflash: RUST IS THE NEW BLING !
Team Hardwood, the only licenced trials riders in Coffs Harbour!
Miles of Smiles
Greg Harding
Team Hardwood, the only licenced trials riders in Coffs Harbour!
Miles of Smiles
Greg Harding
-
- Champion
- Posts: 4062
- Joined: Thu Jun 05, 2003 7:01 pm
- Bike: Many Twinshocks
- Club: CQTC Inc, RTC Inc
- Location: Gladstone, Queensland
Re: Basket Cases
Greg Harding wrote:Hi Everyone,
This is my want list of parts, I realise some of these parts may be non-existant!
ALPINA 213(My 350 Alpina has Sherpa T tank and seat)
Rear sprocket with more than 50 teeth (520) - maybe - will look tomorrow - please confirm you 213 has the two-piece hub a la Pursang/Frontera with sprocket and brake drum on opposite sides?
Rear brake backing plate and shoes - probably - will look tomorrow
TY 250C
Seat base, apparently D and E models are the same - C model same too
Blue plastic side cover - theres a yellow one on eBay at the moment
Magneto cover - available new in carbon fibre ex Europe and Yamaha ones frequently available on eBay ex UK
Rear guard - white plastic replicas available for about $80 ex UK
Air cleaner boot - replica air box to carby hose available ex UK - I just bought one and they are very good
Fork brace
MONTESA 349 (RED)
Conrod kit available ex UK
Gasket set available ex UK
Front and rear spokes TY175/250 front spokes fit the front wheel of the 349 if it has the hub with equal size flanges (ie 247/348/early 349 type)
Rear guard - available ex UK in white and maybe red too
Rear sprocket (520) available new ex UK or local bike shops (TALON brand)
Air cleaner boot - I think air box to carby connector available ex UK
RL 250
Air cleaner boot
Rear sprocket (520)
Engine covers that have clutch on right hand side at front
FANTIC 250 Bike has white plastics, disc brake front end, drum rear and monoshock
Cylinder head with no broken fins
Air cleaner boot
Rear sprocket (520)
TL 125
Plastic side covers
Black plastic innerguard
If anyone can help me, please let me know. If you need parts from my basket case list, talk to me and hopefully we can swap?
relax, nothing is under control
Re: Basket Cases
Greg,
I noticed in your original post a swag of TY175's. Are you thinking of wrecking any bikes or sell parts if in excess? I dont have anything specific to swap to what you need - sorry
I am after a TY175 exhaust, header not important, middle muffler wanted.
Cheers,
Roger
I noticed in your original post a swag of TY175's. Are you thinking of wrecking any bikes or sell parts if in excess? I dont have anything specific to swap to what you need - sorry
I am after a TY175 exhaust, header not important, middle muffler wanted.
Cheers,
Roger
I would rather push my twinshock than ride a modern!
-
- Champion
- Posts: 4062
- Joined: Thu Jun 05, 2003 7:01 pm
- Bike: Many Twinshocks
- Club: CQTC Inc, RTC Inc
- Location: Gladstone, Queensland
Re: Basket Cases
Greg does your M213 rear hub look like this one? (photo is of an M138)
relax, nothing is under control
Re: Basket Cases
Greg, can you have a look for a TY175C chain guard that you may have and want to sell please.
Andrew
Andrew
- Greg Harding
- Golden Basket of Smiles
- Posts: 885
- Joined: Tue Mar 03, 2009 7:33 pm
- Bike: NUMEROUS
- Club: LRMTC & SQTA
Re: Basket Cases
Hi Everyone,
Just replying in order as they came.
Firstly David, Alpina rear wheel is the same as the photo you posted except no holes in hub. Sprocket has 9 mounting holes and you probably guessed Alpina gearing is higher than Sherpa T. According to specs 2nd in Sherpa T same as 1st in Alpina, I have 50 teeth by 11 teeth at the moment. Plus I have managed to break backing plate where the stay mounts and ends off brake shoes! Must be hard on equipment!
Secondly Subanator, I am a sheet metal worker by trade specialising in stainless steel. My intention was to make mandrel bend header pipes and sell exhaust on an exchange basis. However, with you being so far away a middle muffler would be cheaper to freight! Now the hard bit, how do I value a 35 year old muffler? What do you think Roger?
Thirdly Bigem, I have recently checked chain guards for someone else and in short supply, so I don't want to sell it! However as above, I make my own out of aluminium and if you are interested I can email you a photo? These are lighter than original and achieves the same result. Andrew, I would need to know which model as JC and JE are different.
Thanks again for the responses, I am happy to help where I can.
Just replying in order as they came.
Firstly David, Alpina rear wheel is the same as the photo you posted except no holes in hub. Sprocket has 9 mounting holes and you probably guessed Alpina gearing is higher than Sherpa T. According to specs 2nd in Sherpa T same as 1st in Alpina, I have 50 teeth by 11 teeth at the moment. Plus I have managed to break backing plate where the stay mounts and ends off brake shoes! Must be hard on equipment!
Secondly Subanator, I am a sheet metal worker by trade specialising in stainless steel. My intention was to make mandrel bend header pipes and sell exhaust on an exchange basis. However, with you being so far away a middle muffler would be cheaper to freight! Now the hard bit, how do I value a 35 year old muffler? What do you think Roger?
Thirdly Bigem, I have recently checked chain guards for someone else and in short supply, so I don't want to sell it! However as above, I make my own out of aluminium and if you are interested I can email you a photo? These are lighter than original and achieves the same result. Andrew, I would need to know which model as JC and JE are different.
Thanks again for the responses, I am happy to help where I can.
2017 Newsflash: RUST IS THE NEW BLING !
Team Hardwood, the only licenced trials riders in Coffs Harbour!
Miles of Smiles
Greg Harding
Team Hardwood, the only licenced trials riders in Coffs Harbour!
Miles of Smiles
Greg Harding
Re: Basket Cases
Hi Greg
For my 175C as we have talked about , I need a bas plate & the seat base.
Aside from what I have mentioned the only other parts I am chasing is a chain guard. Can you also send me pictures of the one you fabricate?
The tank I'll get repaired. All ther other parts I have now sourced so I'm pretty much ready to start.
FYI I just picked up a complete original exhaust for the 175C for $200 good condition & unmolested.
Cheers Warren
For my 175C as we have talked about , I need a bas plate & the seat base.
Aside from what I have mentioned the only other parts I am chasing is a chain guard. Can you also send me pictures of the one you fabricate?
The tank I'll get repaired. All ther other parts I have now sourced so I'm pretty much ready to start.
FYI I just picked up a complete original exhaust for the 175C for $200 good condition & unmolested.
Cheers Warren
Return to “Twinshock & Classic Trials”
Who is online
Users browsing this forum: No registered users and 39 guests