Hello, Looking to buy a Kick Start Lever for a 1984 Honda TLR200.
Ours split today at the Spline bolt on part--old metal I guess.
Dealers not much help with listings for TLR200.
Bit nervous about buying an aftermarket one from Overseas on EBay etc.
Would appreciate any advise---start of Trials season getting close.
Thank You, Ron S
KICK START LEVER FOR 1984 Honda TLR200
Moderator: Moderators
-
- Junior participant
- Posts: 11
- Joined: Wed Aug 15, 2012 10:01 pm
- Bike: TLR/4RT
- Club: AJS
- Location: S.A.
Re: KICK START LEVER FOR 1984 Honda TLR200
Hi Ron,
I have bought lots of new genuine Honda parts from http://www.partzilla.com/ over several different shipments (including 3 kickstarts) , and have been very reliable.
Try their parts listing for 1986 TLR 200 and remember the American TLR is slightly different from the Aussie version (smaller forks etc)
Cheers Langy
I have bought lots of new genuine Honda parts from http://www.partzilla.com/ over several different shipments (including 3 kickstarts) , and have been very reliable.
Try their parts listing for 1986 TLR 200 and remember the American TLR is slightly different from the Aussie version (smaller forks etc)
Cheers Langy
Re: KICK START LEVER FOR 1984 Honda TLR200
Hi I fitted a xr200r 2002 kick start to my 1983 Tlr200
Joe
Joe
- Julz
- B grade participant
- Posts: 60
- Joined: Wed Feb 23, 2011 8:04 pm
- Bike: SWM TL320
- Club: Twinshock Trials NZ
- Location: Kapiti Coast, Wellington, NZ
Re: KICK START LEVER FOR 1984 Honda TLR200
Cheap Chinese replicas are easily available on this side of the Tasman: http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-856053559.htm
The XR200 kick start is the same part.
The XR200 kick start is the same part.
Re: KICK START LEVER FOR 1984 Honda TLR200
Thank you for your suggestions re using the XR200 Kick Start Lever.
My only concern is that they do not have the Stop cast into the spline section.
I am told if the Kick Start lever swings down to far, it can damage the Internals and possibly gouge a bit out of the cases.
Does anyone know if this is correct ?
Thank You,
Ron S
My only concern is that they do not have the Stop cast into the spline section.
I am told if the Kick Start lever swings down to far, it can damage the Internals and possibly gouge a bit out of the cases.
Does anyone know if this is correct ?
Thank You,
Ron S
Return to “Twinshock & Classic Trials”
Who is online
Users browsing this forum: No registered users and 2 guests