I called it to the old bike shop in Belmont,and he had some bikes in stock in parts.
1, montessa 126 $2,000
2, Bultaco's 250s 2,000, and 4,000 for the Sammy miller rep in parts.And a green one he said it was a very early one 3,000
there was heaps of bits everywhere
Twin Shocks for sale
Moderator: Moderators
-
- Expert participant
- Posts: 346
- Joined: Sat May 22, 2010 7:22 am
- Bike: GG & Fantic.
- Club: Trials Club of Qld.
- Location: Brisbane Qld Aust
Re: Twin Shocks for sale
No bones, if your wanting to get back into Trials don't buy a resto project, not yet anyway, you will spend another $1.5K sourcing all the other bits you need from around the world to get it together plus all the frustration of re-building it plus your time in the shed doing the work. For $2k you should be able to find a nice "going concern" twinshock, for $4K you should be able to find a beauty.
Just my opinion and previous experience.
Just my opinion and previous experience.
-
- Champion
- Posts: 4062
- Joined: Thu Jun 05, 2003 7:01 pm
- Bike: Many Twinshocks
- Club: CQTC Inc, RTC Inc
- Location: Gladstone, Queensland
Re: Twin Shocks for sale
Sounds very expensive for disassembled bikes
relax, nothing is under control
-
- Junior participant
- Posts: 17
- Joined: Sun Aug 05, 2018 9:34 am
- Bike: 1998 beta techno
- Location: newcastle
Re: Twin Shocks for sale
That's what I was thinking, but hes has a lot of cool stuff in there . ossa's Bultaco's. Steel tank huskys ktm,s all pre 90s stuff
-
- B grade participant
- Posts: 85
- Joined: Tue Sep 10, 2013 7:51 pm
- Bike: 2002 Sherco 290
- Club: WDTC
Re: Twin Shocks for sale
I've always said that if someone is selling a bike, car, anything really and it's in pieces....
1) They know that it's going to cost a motsa to put it back together, and that's why they're selling it. If not, they'd have put it back together and be selling it complete and running.
2) Unless you know what you are looking at inside out, it should be cheap. You need to know what is missing, repairable or junk. If not, you could end up spending the buy price rebuilding it.
If the bike is in 1 piece, even if it's not running. You can get a good idea of what you might need to repair. As in it turns over, the gear selection, etc.
I'm glad I got my little TY just before the mainstream asking price went silly for them.
Good luck with your decision on these bikes ladies and gentlemen.
1) They know that it's going to cost a motsa to put it back together, and that's why they're selling it. If not, they'd have put it back together and be selling it complete and running.
2) Unless you know what you are looking at inside out, it should be cheap. You need to know what is missing, repairable or junk. If not, you could end up spending the buy price rebuilding it.
If the bike is in 1 piece, even if it's not running. You can get a good idea of what you might need to repair. As in it turns over, the gear selection, etc.
I'm glad I got my little TY just before the mainstream asking price went silly for them.
Good luck with your decision on these bikes ladies and gentlemen.
-
- Junior participant
- Posts: 8
- Joined: Wed May 16, 2018 7:43 pm
- Bike: TY250R
- Club: AJS
- Location: WA
Re: Twin Shocks for sale
Rod is very correct!
I rebuilt a 76 TY175 a few years ago to original spec, every bearing, crank, down to the last nut and bolt. It became a bit of an obsession to be honest. I kept a spreadsheet to track costs and although very nice, the final cost was around $6k!!!
So, I embarked on building another one using parts left over from the first one, just finished, this one is a bit different, full WES exhaust, OKO flatslide, RD350 inlet + Boyesen reeds, all the usual engine stuff, NOS forks, etc etc, this one came out at $7.5K!!
Obviously the Wife thinks I'm mad but I must point out that it all happens over a few years and the the whole experience of the build is worth the money spent.
Now I have a Pinky, rescued from a wreckers, saw it out of the corner of my eye when walking past...couldn't resist it!! Just to get it rideable , including the cost price is already $4k + and it still look rough!!!
In conclusion, yes, buy sensibly, there's some great bikes out there. If anyone needs any TY175 parts, I have a box full of possibly useful parts..................
I rebuilt a 76 TY175 a few years ago to original spec, every bearing, crank, down to the last nut and bolt. It became a bit of an obsession to be honest. I kept a spreadsheet to track costs and although very nice, the final cost was around $6k!!!
So, I embarked on building another one using parts left over from the first one, just finished, this one is a bit different, full WES exhaust, OKO flatslide, RD350 inlet + Boyesen reeds, all the usual engine stuff, NOS forks, etc etc, this one came out at $7.5K!!
Obviously the Wife thinks I'm mad but I must point out that it all happens over a few years and the the whole experience of the build is worth the money spent.
Now I have a Pinky, rescued from a wreckers, saw it out of the corner of my eye when walking past...couldn't resist it!! Just to get it rideable , including the cost price is already $4k + and it still look rough!!!
In conclusion, yes, buy sensibly, there's some great bikes out there. If anyone needs any TY175 parts, I have a box full of possibly useful parts..................
Return to “Waiting in the queue”
Who is online
Users browsing this forum: No registered users and 15 guests