Trials Australia Logo
Menu

2011 Scorpa for Australia.

8th Oct, 2010 | Paul Arnott

Scorpa is back down under! Brand new 2011 Scorpa trials bikes will be available in Australia from December 2010. When Scorpa founder, and now new owner,  Marc Tessier re-acquired the Scorpa brand,  he promised to build a brand-new 2011 model that was world class, but would maintain the Scorpa identity.

 


The Hell Team will have the new SR280 and SR125 two strokes available late 2010, hopefully debuting at The Melbourne Motorcycle Show.

2011ScorpaTent

Below is an extract from the well respected Trials and Motrcross News, UK's leading weekly dirtbike publication. T+MX can be found online at http://www.tmxnews.co.uk/index

Marc Tessier has been absolutely true to his word. The all-new Scorpa makes a bold statement with its striking orange and black colour scheme.

And while the overall look is unmistakeably Scorpa, with its distinctive steel tube chassis, the whole bike is actually brand new with the rear suspension, while remaining linkless, featuring a shorter shock absorber set in a more upright position to make it feel and work in a similar way to the opposition.

Scorpa scorcher

And while offering a similar profile to the old Yamaha-engined models the whole machine, including the trademark sculpted fuel tank, is considerably narrower than before.

The 2011 Sherco-derived engine is mounted conventionally in the chassis and ancillaries like the exhaust and airbox are all brand-new for this application. So with an all new 2011 Scorpa fired-up it’s over to Woody Hole to give us the first impression...

I have to say that my very first impression, on seeing the SR280, is that Scorpa has made a really bold statement with the colour scheme.

The orange and black is very striking and it really puts a marker down that Scorpa has moved-on while at the same time retaining the distinctive Scorpa profile.
Personally, I think it looks good.

Looking closer at the bike it is pretty obvious that the development and production guys done a really good job.

The engine is much smaller than the old Yamaha TYZ lump and Scorpa has done a pretty smooth job of mating the engine to the chassis including all-new exhaust and air-box.
And it is a really strong chassis featuring a separate flat-plate sub-frame.

This is best illustrated by the fact that you can pick the bike up by the exhaust rear box and it doesn’t flex at all. It remains rock solid.

Firing the bike up, an easy couple of kicks, the exhaust gives a real sharp, crisp note and it takes a bit of getting used to after the old flat Yamaha noise.

They really have done a brilliant job on the exhaust as it actually sounds like a torquey, grippy motor – and it turns out to be exactly that.

On bike tests I used to make a fuss sometimes about setting the handlebars and levers and stuff but recently if it has felt near-enough out of the box I have just got on with it.

I rode the Scorpa exactly as presented and, while I could have tweaked the levers and bars it was actually absolutely fine.

As with all modern bikes the riding position felt good straight away and I could just get on and ride it.

The first thing people want to know is how the rear suspension felt. To be honest, if you just got on and rode it without knowing I don’t think 99% of people could tell you whether it had a link o not. I actually tackled a lot bigger steps and rocks on the Scorpa than I normally would do in a test, simply because Nigel Birkett wanted me to.

Scorpa scorcher

He encouraged me to go for the real big stuff just to show that the rear suspension was a major update. The shock was set-up well, it’s supple but not too soft and it never bottomed-out, just soaked-up the hits. The front forks are conventional Marzocchis and as you’d expect worked absolutely fine.

In fact the suspension overall was nicely matched. The whole bike feels surprisingly well-balanced. It does have a massive amount of steering lock and while it will turn on a sixpence without tucking I think that beginners or novices could get caught out if they just yanked the bars onto lock. For the competent rider this extra lock offers a lot of potential.
The front brake was good with one finger operation and plenty of power coupled with a good feel.

The rear brake was about the only point about which I could offer some criticism. It worked well enough, you could lock the wheel if you wanted, but didn’t offer a lot of feel, it just felt a bit wooden.

Gearing with the five-speed box is as per Sherco. First and second are very close, then a bit of a gap to third and then fourth and fifth a jump away.

First and second are your normal section choices, third is for faster, steeper hazards or when you want to burn through mud, while the motor would pull fourth for flat-out hillclimbs.

The clutch is quite aggressive, it picks-up the drive quickly but has a definite, controllable biting point so that you know exactly when it is going to set-off when you are attacking big steps and you want the timing just right.

The engine is set up for bottom and mid range and is very, very torquey.

You can attack a section, then back the motor right off and then just pick-up the grip from the bottom-end again. Very impressive.

Although it was dry at the test venue, the steep terrain contained some really slippery rock sections and the engine was perfect for just seeking and finding grip.

Overall, the whole bike just feels so much smaller, lighter and more nimble than before, with the new engine allowing everything else on the bike to be slimmed-down and tucked-in.
Even with the slimmer tank you don’t look down and see engine cases sticking out like before. Having said that it is still a strong, robust bike.

Although it has shed quite a bit of weight it has not been built to be the lightest model around.
It is a very strong package, especially around the rear where that flat-plate sub-frame holds all the ancillary bits absolutely solid.

The bottom line is that while the Yam-engined models were very much niche machines, with a definite section of buyers, the 2011 Scorpa is now much more mainstream.

It goes and handles in a similar manner to the current established marques.

If you are looking to buy a new trials bike the 2011 Scorpa is definitely worthy of your consideration.

SPECIFICATIONS

2011 model Scorpa SR280

ENGINE
Type:    Single-cylinder, liquid-cooled two-stroke with reed-valve induction
Bore x stroke:    76 x 60 mm
Displacement:    272cc
Carburettor:    Dell’Orto PHPL 26mm diameter
Kick:    Start
Transmission:    5-speed
Lubrication:    Premix oil/fuel at 2% ratio
CHASSIS
Type:    Perimeter steel frame
SUSPENSION
Front:    40 mm Marzocchi hydraulic forks with adjustable compression and rebound damping
Travel:    177 mm (at axle)
Rear:    Swingarm and Sachs adjustable hydraulic monoshock
Travel:    165mm (at axle)
BRAKES
Front:    182 mm Floating Braking ‘Wave’ disc and four-piston AJP calliper
Rear:    150 mm Braking ‘Wave’ disc and dual-piston AJP calliper
TYRES
Front:    1.60” x 21” tube type Trials
Rear:    2.15” x 18” tubeless Trials
ANCILLARIES
Skid plate:    7075 Ergal with T6 treatment
Rims:    Morad titanium-anodized light alloy
Kick-start:    Geared system with folding lever
DIMENSIONS
Length:    2,023 mm
Width:    820 mm
Height:    1,155 mm
Wheelbase:    1,330 mm
Seat height:    665 mm
Clearance:    320 mm
Weight:    67 kg

Leave a Reply